A1 (8X) - VAG Coding

Audi A1 8X (2010-2018) / Audi S1 / A1 8X Facelift (specific facelift coding at bottom of page)

A1 (8X) – Activate DVD playback while driving (VIM)

Purpose : Allows you to remove the MMI protection and continue watching a DVD or video while driving (Video in Motion). Proceed...

A1 (8X) – Activate Hill Start Assist

Purpose: to activate Audi Hill Start Assist. Caution: Not to be confused with Audi Hold Assist, which keeps the vehicle stationary on...

A1 (8X) – Activate rearview camera (retrofit)

Purpose: To activate the reversing camera after it has been installed on the MMI RMC or 3GP. Procedure: 1 - Engine off,...

A1 (8X) – APS Radar Volume

Purpose : to select the volume of the Audi Parking System radars. Proceed : 1 - Engine off, ignition off, connect your...

A1 (8X) – Audi Parking System Deactivation Speed

Purpose : to select the deactivation speed of the Audi Parking System. Proceed : 1 - Engine off, ignition off, connect your...

A1 (8X) – Automatic folding of mirrors

Function: Automatically folds the side mirrors when the vehicle is locked. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM...

A1 (8X) – Automatic headlight activation from 140 km/h

Purpose: to automatically switch on the lights when the vehicle is travelling at over 140 km/h. (The lights will automatically go out...

A1 (8X) – Automatic headlight activation when it rains

Purpose: to automatically turn on the lights when it's raining and the wipers have been triggered. Procedure: 1 - Engine off, ignition...

A1 (8X) – AUX-IN activation (retrofit)

Purpose: to activate the AUX (Auxiliary) socket on the rear of the MMI 2G 3G 3GPLUS, for retrofitting to CarPlay / Android...

A1 (8X) – Beeps when locking/unlocking the vehicle

Purpose: Enables beeps when locking or unlocking the vehicle. Only for vehicles with the factory-installed alarm (1 beep to lock, 2 beeps...

A1 (8X) – Change MMI RMC start logo

Purpose: to change the Splash Screen of the MMI RMC. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS...

A1 (8X) – Comfort Turn Signal

Purpose: to set the number of flashes for the “Comfort flashing” option. Proceed : 1 - Engine off, ignition off, connect your...

A1 (8X) – Coming / Leaving Home with Daytime Running Lights (DRL)

Purpose: Allows use of daytime running lights (DRL) for Coming Home and Leaving Home. Proceed : 1 - Engine off, ignition off,...

A1 (8X) – Coming / Leaving Home with fog lamps

Purpose: Enables fog lamps to be used for Coming Home and Leaving Home. Procedure: 1 - Engine off, ignition off, connect your...

A1 (8X) – Coming / Leaving Home with the Xenons

Purpose: Activates xenon headlamps instead of fog lamps for Coming Home and Leaving Home. Procedure: 1 - With the engine off and...

A1 (8X) – Corner Lights

Purpose: Activating the turn signals causes the fog light on the side toward which you’re turning the steering wheel to turn on...

A1 (8X) – Cruise control activation (retrofit)

Purpose : to activate GRA cruise control (retrofit). Modification only possible after retrofit of cruise control switch. Procedure: 1 - Engine off,...

A1 (8X) – Deactivate brake pad warning light

Purpose: to deactivate the worn brake pad warning light on the ODB (on-board computer), e.g. if the brake pad has no sensor...

A1 (8X) – Deactivate windshield washer indicator

Purpose: to deactivate the windshield washer indicator on the ODB (on-board computer). Procedure: 1 - Engine off, ignition off, connect your official...

A1 (8X) – Defrost time setting

Purpose: to set the operating time for mirror and rear window defrosting. Procedure: 1 - Engine off, ignition off, connect your official...

A1 (8X) – Delete belt alarm

Purpose: To suppress the audible alarm and the warning light on the speedometer when driving without a seatbelt. Procedure: 1 - Engine...

A1 (8X) – Disable Start/Stop display in ODB

Purpose: to deactivate the Start and Stop indicator in the ODB (On-Board Computer). Procedure: 1 - Engine off, ignition off, connect your...

A1 (8X) – Disable the rear windshield wiper when reversing

Purpose: to deactivate automatic activation of the rear windshield wiper during reversing when the front windshield wipers are operating. Procedure: 1 -...

A1 (8X) – Disabling the Audi Parking System Engagement Beep

Purpose : deactivates the beep when the Audi Parking System is engaged. Proceed : 1 - Engine off, ignition off, connect your...

A1 (8X) – Display of reverse parking sensors on the MMI

Purpose: activates the display of reversing radars on the MMI, for vehicles with the Audi Parking System rear option only. Requires at...

A1 (8X) – Fixed the OBD fuel consumption display

Purpose: Allows you to correct the fuel consumption display on the onboard computer. Note: The changes you make affect the display of...

A1 (8X) – Frequency of APS radars

Purpose : to select the Audi Parking System radar frequency. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM...

A1 (8X) – Headlights in flash mode during emergency braking

Purpose: activates the brake/turn signal lights in flash mode during emergency braking. Procedure: 1 - Engine off, ignition off, connect your official...

A1 (8X) – LED Taillight Conversion (Retrofit)

Purpose: Allows you to adapt the taillights on the Audi A1 8X after upgrading from the halogen version to the LED version....

A1 (8X) – Lock CD/DVD eject button on MMI RMC

Purpose: locks/unlocks the CD/DVD eject button on the MMI RMC. Protection against CD theft. Procedure: 1 - Engine off, ignition off, connect...

A1 (8X) – Lower passenger mirror when reversing

Purpose: automatically lowers the passenger mirror when reversing. The mirror adjustment knob must be in position“R” for the passenger mirror to lower...

A1 (8X) – Maintain LED brightness when the turn signals are on

Purpose: Maintains the brightness of the LEDs when the turn signals are on. Procedure : 1 - Engine off, ignition off, connect...

A1 (8X) – MMI sound reduction with Audi Parking System

Purpose : automatically reduces the MMI sound when using the Audi Parking System. Proceed : 1 - Engine off, ignition off, connect...

A1 (8X) – Needle check

Purpose: activates needle sweep when the car is started. (Needle Sweep) Procedure: 1 - Engine off, ignition off, connect your official VAG-COM...

A1 (8X) – ODB efficiency indicator display

Purpose: Enables the efficiency indicator to be displayed on the ODB (On Board Computer) for an efficient, environmentally-friendly driving style. Procedure: 1...

A1 (8X) – Rear daytime running lights (DRL)

Purpose: Enables the rear lights to function as daytime running lights at the same time as the front TFL LEDs (Scandinavian DRL)....

A1 (8X) – Setting the “Leaving Home” Duration

Purpose: to set the length of time the headlights remain on after the car is unlocked. Procedure: 1 – Engine off, ignition...

A1 (8X) – Setting the Coming Home Duration

Purpose: Set the length of time the headlights remain on after the car is locked. Procedure: 1 - Engine off, ignition off,...

A1 (8X) – Start/Stop deactivation

Purpose: to disable Start and Stop completely. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to...

A1 (8X) – Turn Daytime Running Lights (DRL) on/off from the MMI

Purpose: to activate/deactivate the daytime running lights (DRL) from the MMI. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM...

A1 (8X) – Turn off daytime running lights (DRL) when the parking brake is engaged

Purpose: to deactivate the daytime running lights (DRL) when the handbrake is engaged. Procedure: 1 - Engine off, ignition off, connect your...

VAG Coding VCDS ODBeleven Audi A1 8X facelift

Audi A1 8X Facelift (2014-2018)

List of new Audi A1 8X codings

OBDeleven One-Click Apps Audi A1 8X List

This post is also available in: Français (French)