LEON (1M)

VAG Coding VCDS ODBeleven Seat Leon 1M

Seat Leon 1 (1M) (1999-2006) / Seat Toledo 1M

Leon (1M) – Automatic door locks

Purpose : To configure automatic door locking at speeds over 15 km/h. Proceed : 1 - Engine off, ignition off, connect your...

Read more ...

Leon (1M) – Automatic door unlocking

Purpose : to configure automatic door unlocking when the ignition key is removed. Proceed : 1 - Engine off, ignition off, connect...

Read more ...

Leon (1M) – Change ODB language

Purpose : To change the language of the ODB. (Highline MFA) Proceed : 1 - Engine off, ignition off, connect your official...

Read more ...

Leon (1M) – Confirmation of vehicle unlocking (turn signals)

Purpose : activates turn signals when vehicle is unlocked. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS...

Read more ...

Leon (1M) – Cruise control activation (retrofit)

Purpose: to activate the speed governor after retrofitting. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to...

Read more ...

Leon (1M) – Deactivate brake pad warning light

Purpose : to deactivate the worn brake pad warning light on the ODB (on-board computer), e.g. if the brake pad has no...

Read more ...

Leon (1M) – Deactivate washer indicator

Purpose : to deactivate the windshield washer indicator on the ODB (on-board computer). (Models after 2000) Proceed : 1 - Engine off,...

Read more ...

Leon (1M) – Delete belt alarm

Purpose : To suppress the audible alarm and the warning light on the speedometer when driving without a seatbelt. Proceed : 1...

Read more ...

Leon (1M) – Horn setting

Purpose : Allows you to modify the type of tone and duration of the horn sound, depending on the country. Proceed :...

Read more ...

Leon (1M) – Mirror defrost duration

Purpose: Selects the duration of mirror defrosting. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to...

Read more ...

Leon (1M) – Programming a Remote Control

Purpose: Allows you to program the remote controls that will be used with the vehicle for central locking and unlocking. ⚠️ WARNING:...

Read more ...

Leon (1M) – Rear defrost duration

Purpose: Selects rear defrost duration. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then...

Read more ...

Leon (1M) – Reset the remote controls

Purpose: Resets the settings for all remote controls associated with the vehicle. ⚠️ WARNING: After completing this procedure, all remote controls will...

Read more ...

Leon (1M) – Selective unlocking / all doors

But : Permet de sélectionner le type d’ouverture des portières après appui sur la télécommande. Sélectif: un appui déverrouille uniquement la portière...

Read more ...

Leon (1M) – Vehicle lock confirmation (beeps)

Purpose : Activates beeps when vehicle is locked. Only for vehicles with alarm (1 beep for locking) Proceed : 1 - Engine...

Read more ...

Leon (1M) – Vehicle lock confirmation (turn signals)

Purpose : activates turn signals when vehicle is locked. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS...

Read more ...

Leon (1M) – Vehicle unlocking confirmation (beeps)

Purpose : Activates beeps when vehicle is unlocked. Only for vehicles with alarm (2 beeps for unlocking) Proceed : 1 - Engine...

Read more ...


This post is also available in: Français (French)

error: Content is protected !!
Enable Notifications OK No thanks