ALTEA (5P)

VAG Coding VCDS ODBeleven Seat Altea 5P

Seat Altea 5P (2004-2015) / Seat Altea XL / Altea 5P Facelift (specific facelift coding at bottom of page)

Altea (5P) – Activate Driving School mode (RCD 210/RCD 310)

Purpose: Allows you to add a Driving School mode view to the RCD 210, RCD 310 that displays turn signals, speed ......

Read more ...

Altea (5P) – Activate Leaving Home without light sensor

Purpose: automatically switches on the headlights each time the vehicle is unlocked. The headlights will come on whether it's day or night....

Read more ...

Altea (5P) – Activate mood lighting

Purpose: to activate ambient lighting. (After installation of wiring and lighting for retrofitting) Procedure : 1 - Engine off, ignition off, connect...

Read more ...

Altea (5P) – Activate turn signals in US mode

Purpose: to activate US indicators. (Altea phase 1 only) Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable...

Read more ...

Altea (5P) – Adjusting the power steering stiffness

Purpose: Allows you to adjust the power steering stiffness for a smoother or stiffer, sportier steering feel. Proceed : 1 - Engine...

Read more ...

Altea (5P) – Ambient light intensity

Purpose: Used to adjust ambient lighting intensity. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to the...

Read more ...

Altea (5P) – Automatic closing of windows and roof in case of rain

Purpose: Automatically closes the windows and sunroof when it rains. The vehicle must be locked using the remote control for this to...

Read more ...

Altea (5P) – Automatic door locks

Purpose: to set automatic door locking from 15km/h. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable...

Read more ...

Altea (5P) – Automatic door unlocking

Purpose: to set automatic door unlocking when the ignition key is removed. Proceed : 1 - Engine off, ignition off, connect your...

Read more ...

Altea (5P) – Automatic headlamp activation from 140 km/h

Purpose: to automatically switch on the lights when the vehicle is travelling at over 140 km/h. (The lights will automatically go out...

Read more ...

Altea (5P) – Automatic headlamp activation in case of rain

Purpose: to automatically turn on the lights when it's raining and the wipers have been triggered. Procedure: 1 - With the engine...

Read more ...

Altea (5P) – Change ODB language

Purpose: Select the language of your on-board computer. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable...

Read more ...

Altea (5P) – Comfort flasher

Purpose: to activate and set the number of flashes for the “Comfort flashing” option. Proceed : 1 - Engine off, ignition off,...

Read more ...

Altea (5P) – Coming Home time setting

Purpose: Set the length of time the headlights remain on after the car is locked. Procedure: 1 - Engine off, ignition off,...

Read more ...

Altea (5P) – Corner lights activation

Purpose: to activate cornering lights with fog lamps. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to...

Read more ...

Altea (5P) – Defrost time setting

Purpose: to set the operating time for mirror and rear window defrosting. Procedure: 1 - Engine off, ignition off, connect your official...

Read more ...

Altea (5P) – Disable rear wiper when reversing

Purpose: to deactivate automatic activation of the rear windshield wiper during reversing when the front windshield wipers are operating. Procedure: 1 -...

Read more ...

Altea (5P) – Door lock confirmation (key)

Purpose: Allows you to configure the door lock confirmation when using the key. Proceed : 1 - Engine off, ignition off, connect...

Read more ...

Altea (5P) – Door lock confirmation (Remote control)

Purpose: Allows you to configure the door lock confirmation when using the remote control. Proceed : 1 - Engine off, ignition off,...

Read more ...

Altea (5P) – Door unlock confirmation (Remote control)

Purpose : to set the door unlock confirmation when using the remote control. Proceed : 1 - Engine off, ignition off, connect...

Read more ...

Altea (5P) – Door unlocking confirmation (Key)

Purpose: Allows you to configure the door unlock confirmation when using the key. Proceed : 1 - Engine off, ignition off, connect...

Read more ...

Altea (5P) – Fixed the OBD fuel consumption display

Purpose: Allows you to correct the fuel consumption display on the onboard computer. This setting can only be changed on mid-range and...

Read more ...

Altea (5P) – Fold down mirrors with ignition off and door open

Purpose : Allows mirrors to be folded down even after the ignition has been switched off and a door opened. (Also enables...

Read more ...

Altea (5P) – Headlamp washer duration setting

Purpose: Allows you to set how long the headlight washers remain activated. Procedure: 1 - Engine off, ignition off, connect your official...

Read more ...

Altea (5P) – Leaving Home duration setting

Purpose: to set the length of time the headlights remain on after the car is unlocked. Procedure: 1 - Engine off, ignition...

Read more ...

Altea (5P) – One-touch window closure

Purpose: to activate closing and opening of the windows and sunroof with the remote control WITHOUT remaining pressed until the windows are...

Read more ...

Altea (5P) – Programming a Remote Control

Purpose: Allows you to program the remote controls that will be used with the vehicle for central locking and unlocking. ⚠️ WARNING:...

Read more ...

Altea (5P) – Remove belt alarm

Purpose: To suppress the audible alarm and the warning light on the speedometer when driving without a seatbelt. Procedure: 1 - Engine...

Read more ...

Altea (5P) – Reset the remote controls

Purpose: Resets the settings for all remote controls associated with the vehicle. ⚠️ WARNING: After completing this procedure, all remote controls will...

Read more ...

Altea (5P) – Selective door unlocking

Purpose : Used to set up selective door unlocking. When unlocking the vehicle, only the driver's door is unlocked. To unlock all...

Read more ...

Altea (5P) – Turn on Daytime Running Lights with Fog Lights (DRL)

Purpose: Allows fog lights to be used as daytime running lights. Procedure: 1 – With the engine off and the ignition off,...

Read more ...


VAG Coding VCDS ODBeleven Seat Altea 5P facelift

Seat Altea 5P Facelift (2009-2015)

Altea (5P) Facelift – Lowering the passenger mirror when reversing

Purpose: automatically lowers the passenger mirror when reversing. The mirror adjustment knob must be in position“R” for the passenger mirror to lower...

Read more ...

Altea (5P) Facelift – Activate rearview camera (retrofit)

Purpose: Enables the rearview camera after it has been installed on the RCD 510/330/360/440 and RNS 315/510 (retrofit). Proceed : 1 -...

Read more ...

Altea (5P) Facelift – Activate RNS 510 voice command

Purpose: to activate voice control on the RNS 510 (SDS). ATTENTION: RNS 510 firmware must be version v2660. Activating voice control brings...

Read more ...

Altea (5P) Facelift – Activate Bluetooth on RNS 315

Purpose: to activate Bluetooth on the RNS 315. ATTENTION: Not all RNS-315 are equipped with a Bluetooth module. Module compatibility list3C0 035...

Read more ...

Altea (5P) Facelift – Activate hidden menu RNS 315

Purpose: to activate the hidden menu in RNS 315. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable...

Read more ...

Altea (5P) Facelift – Activate hidden menu RNS 510

Purpose: Activates the hidden menu in RNS 510. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to...

Read more ...

Altea (5P) Facelift – OPS speed camera display on car radio screen

Purpose: Enables the display of OPS speed cameras on the car radio screen. Please note: The vehicle must be equipped with a...

Read more ...

Altea (5P) Facelift – Speed limit display RNS 510

Purpose : to display the speed limit on the RNS 510 navigation screen. Procedure: 1 - Engine off, ignition off, connect your...

Read more ...

Altea (5P) Facelift – Changing the RCD/RNS 510 theme

Purpose: to change the display theme of the RCD 510 and RNS 510. Procedure: 1 - Engine off, ignition off, connect your...

Read more ...

Altea (5P) Facelift – Needle check

Purpose: Activates needle sweep when vehicle is started. (Needle Sweep) Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS...

Read more ...

Altea (5P) Facelift – Deactivate windshield washer indicator

Purpose: to deactivate the windshield washer indicator on the ODB (on-board computer). Procedure: 1 - Engine off, ignition off, connect your official...

Read more ...

Altea (5P) Facelift – Deactivate brake pad warning light

Purpose: to deactivate the worn brake pad warning light on the ODB (on-board computer), e.g. if the brake pad has no sensor...

Read more ...

Altea (5P) Facelift – Programming a Remote Control

Purpose: Allows you to program the remote controls that will be used with the vehicle for central locking and unlocking. ⚠️ WARNING:...

Read more ...

Altea (5P) Facelift – Resetting the Remote Controls

Purpose: Resets the settings for all remote controls associated with the vehicle. ⚠️ WARNING: After completing this procedure, all remote controls will...

Read more ...

Altea (5P) Facelift – Remove alarm belt

Purpose: To suppress the audible alarm and the warning light on the speedometer when driving without a seatbelt. Procedure: 1 - Engine...

Read more ...

Altea (5P) Facelift – Lock the CD/DVD eject button on the RNS 510

Purpose: locks/unlocks the RNS 510's CD/DVD eject button. Protection against theft of your navigation DVD. Procedure: 1 - Engine off, ignition off,...

Read more ...


This post is also available in: Français (French)

error: Contenu Protégé ! Content is protected !!
Enable Notifications OK No thanks