
Skoda Octavia 1 (1U) (1996-2004)
Octavia (1U) – Automatic door locks
Purpose : To configure automatic door locking at speeds over 15 km/h. Proceed : 1 - Engine off, ignition off, connect your...
Octavia (1U) – Automatic door unlocking
Purpose : to configure automatic door unlocking when the ignition key is removed. Proceed : 1 - Engine off, ignition off, connect...
Octavia (1U) – Change ODB language
Purpose : To change the language of the ODB. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS...
Octavia (1U) – Confirmation of vehicle unlocking (turn signals)
Purpose : activates turn signals when vehicle is unlocked. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS...
Octavia (1U) – Cruise control activation (retrofit)
Purpose: to activate the speed governor after retrofitting. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to...
Octavia (1U) – Deactivate brake pad warning light
Purpose: Allows you to disable the brake pad wear warning light on the OBD (On-Board Computer), for example, for brake pads without...
Octavia (1U) – Deactivate windshield washer indicator
Purpose : to deactivate the windshield washer indicator on the ODB (on-board computer). (Models after 2001) Proceed : 1 - Engine off,...
Octavia (1U) – Delete belt alarm
Purpose : To suppress the audible alarm and the warning light on the speedometer when driving without a seatbelt. Proceed : 1...
Octavia (1U) – Horn setting
Purpose : Allows you to modify the type of tone and duration of the horn sound, depending on the country. Proceed :...
Octavia (1U) – Mirror defrost duration
Purpose: Selects the duration of mirror defrosting. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to...
Octavia (1U) – Programming a Remote Control
Purpose: Allows you to program the remote controls that will be used with the vehicle for central locking and unlocking. ⚠️ WARNING:...
Octavia (1U) – Rear defrost duration
Purpose: Selects rear defrost duration. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then...
Octavia (1U) – Reset the Remote Controls
Purpose: Resets the settings for all remote controls associated with the vehicle. ⚠️ WARNING: After completing this procedure, all remote controls will...
Octavia (1U) – Selective unlocking / all doors
But : Permet de sélectionner le type d’ouverture des portières après appui sur la télécommande. Sélectif: un appui déverrouille uniquement la portière...
Octavia (1U) – Vehicle lock confirmation (beeps)
Purpose : Activates beeps when vehicle is locked. Only for vehicles with alarm (1 beep for locking) Proceed : 1 - Engine...
Octavia (1U) – Vehicle lock confirmation (turn signals)
Purpose : activates turn signals when vehicle is locked. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS...
Octavia (1U) – Vehicle unlocking confirmation (beeps)
Purpose : Activates beeps when vehicle is unlocked. Only for vehicles with alarm (2 beeps for unlocking) Proceed : 1 - Engine...
This post is also available in: