Cupra Born (K11) (2021+ )
(Some ECUs may be inaccessible by SFD protection with VCDS, use OBDEleven to unlock SFD protection, and open the engine cover before coding)
Software update 2.4 resets almost all previous encodings.
Update 3.0 resets most, but not all, encodings.
Firmware 3.7 compatible.
OBDeleven Pro subscription and SFD access required.
Born (K11) – Activate Lane Assist memory function
Purpose: To store the Lane Assist function in memory. If you deactivate it, the Lane Assist will not automatically resume the next...
Born (K11) – Activate/deactivate daytime running lights (DRL) via display
Purpose: Enables / disables daytime running lights (DRL) from the display menu. ATTENTION to your country's regulations and technical inspection for daytime...
Born (K11) – Activates progressive interior lighting
Purpose: turns interior lights (door knobs, dashboard, center console) on and off gradually. By default, interior lights switch on and off immediately...
Born (K11) – Automatically closes windows when locked
Purpose: To automatically close the windows when the car is locked. Procedure : 1 - Engine off, ignition off, connect your official...
Born (K11) – Comfort flashing light
Purpose: to set the number of flashes for the “Comfort flashing” option. Proceed : 1 - Engine off, ignition off, connect your...
Born (K11) – Daytime running light deactivation (DRL) with handbrake on
Purpose: to deactivate the daytime running lights (DRL) using the handbrake. Proceed : 1 - Engine off, ignition off, connect your official...
Born (K11) – Deactivate right-hand overtaking prevention
Purpose: to deactivate the ACC lane assist system, e.g. when on the freeway and there is a traffic jam in the left...
Born (K11) – Deactivation of parking aid activation beep
Purpose: to deactivate the beep when reverse gear is engaged or when parking assistance is activated manually. Procedure: 1 - Engine off,...
Born (K11) – Delete belt alarm
Purpose: to suppress the audible alarm and warning light in the Virtual Cockpit when driving without a seatbelt. Proceed : 1 -...
Born (K11) – Displays fan speed on air conditioning in Auto mode
Purpose: to display fan speed when automatic climate control mode is activated (Climatronic fan speed display Auto mode / works with touch-sensitive...
Born (K11) – Door lock/unlock confirmation (beep/horn)
Purpose: to set confirmation of door locking/unlocking with beep (alarm) or horn. SFD: yes Watch out! There are 5 lines of coding...
Born (K11) – Highway light sensitivity settings
Purpose: to adjust the sensitivity of the highway lights. SFD: yes Procedure: 1- Engine off, ignition off, connect your official VAG-COM VCDS...
Born (K11) – Light Assist always active
Purpose: automatically activates the high beam assistant on start-up if it was active before the ignition was switched off. SFD: yes Proceed...
Born (K11) – Modify warning thresholds for icy conditions
Goal: Select the outdoor temperature value for icy conditions for which the warning is displayed on the screen. (Ice Warning) SFD: yes...
Born (K11) – Rear lights activated with daytime running lights (DRL)
Purpose: activates rear lights activated with daytime running lights (Scandinavian DRL) (This method activates the dashboard lighting) Proceed : 1 - Engine...
Born (K11) – Set air conditioning circulation in Auto mode
Purpose: to adjust air circulation (more or less air) in Auto mode. Proceed : 1 - Engine off, ignition off, connect your...
Born (K11) – Set light sensor sensitivity
Purpose: Adjusts the sensitivity of the light sensor. SFD: yes Procedure: 1- Engine off, ignition off, connect your official VAG-COM VCDS cable...
Born (K11) – Speed of radar (or reversing camera) deactivation
Purpose: Selects the speed at which the radar and/or reversing camera are deactivated. Proceed : 1 - Engine off, ignition off, connect...
Born (K11) – Unlock Android Auto limitations
Purpose: to unlock the limitations of Android Auto, allowing access to all functions without the restrictions imposed by default on the multimedia...
