Purpose : to activate GRA cruise control (retrofit).
Modification only possible after retrofit of cruise control switch.
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on ” Select “, then click on “Select”. 01 – Engine ” .
4 – Click on“Coding – 07” then click on“Long Coding Helper“.
5 – Select byte“5“
Select bit“5-6” 20 Cruise Control System (CCS) installed
Line 2:
3 – Click on ” Select ” then click on ” 16 – Multifunction steering wheel ” .
4 – Click on“Coding – 07” then click on“Long Coding Helper“.
5 – Select byte“5“
Select bit“4-7” 20 Cruise Control controlled via Separate Lever
