Purpose: Displays the amount of fuel needed to completely fill your tank on the OBD (On-Board Computer).
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select”, then click on“17 – Instruments“.
4 – Click on “Adaptation – 10” .
5 – Select “Volume to be Replenished” from the value list.
Select ” Yes ” in the second value list.
