Purpose: Allows you to configure selective door unlocking.
When unlocking the vehicle, only the driver’s door and the rear door on the driver’s side (depending on the programming) will be unlocked. To unlock all doors, press the unlock button on the remote control twice.
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select”, then click on“46 – Comfort module“.
4 – Click “Adaptation 10.”
5 – Channel 01:
Set the value to 1 to unlock only the driver’s door
Set the value to 2 to unlock only the front and rear doors on the driver’s side
This post is also available in:
Français (French)
