Purpose: Allows you to select the speed at which speed cameras are deactivated.
Procedure:
1 – With the engine off and the ignition switched off, connect your official VAG-COM VCDS cable to the computer, then connect the other end to your vehicle’s diagnostic port.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select”, then click on“76 – Stationnt help”.
4 – Click “Adaptation 10.”
5 – Channel 03 ( Choose the new speed, between 1 and 15 km/h )
This post is also available in:
Français (French)
