Purpose: Displays the amount of fuel needed to completely fill your tank on the OBD (On-Board Computer).
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click “Select,” then click “17 – Instruments.”
4 – Click “Adaptation – 10.”
5 – Select “Volume to be Replenished” from the list of values.
Select ” Yes ” in the second value list.
This post is also available in:
Français (French)
