Purpose: Allows you to add the mirror adjustment menu—synchronized or individual—to the OBD (MFA). (2011+)
Procedure:
1 – With the engine off and the ignition off, connect your official VAG-COM VCDS cable to the computer, then connect the other end to your vehicle’s diagnostic port.
2 – Turn on the ignition, then launch the VCDS program.
Line 1:
3 – Click “Select,” then click “09 – Cent. Elect.”
4 – Click “Code 07.”
5 – Select module “0” and click “Long Coding Helper”:
Byte 08: Check Bit 6 ” Synchronized Mirror Adjustment“
This post is also available in:
Français (French)
