Purpose: Selects the speed at which the reversing camera and radars are deactivated.
Procedure:
1 – With the engine off and the ignition switched off, connect your official VAG-COM VCDS cable to the computer, then connect the other end to your vehicle’s diagnostic port.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select”, then click on“10 – Assistance Stationnt”.
4 – Click “Adaptation 10.”
5 – Channel 23 ( Choose the new speed, 20 km/h being the maximum )
This post is also available in:
Français (French)
