
Purpose: Enables the US turn signals. (Tiguan 5N Phase 1 only)
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click “ Select,” then click “ 09 – Cent. Elect.”
4 – Click on “ Code 07.”
5 – Select module “0” and click “Long Coding Helper”:
Byte 7: Enter the value 32 in the ” Dec” field
” (brightness value in %, origin: 0)
Decimal examples shown in yellow in the image:
14 (corresponds to a 20% variation in the indicator lights)
1E (corresponds to a 30% variation in the indicator lights)
28 (corresponds to a 40% variation in the indicator lights)

This post is also available in: