Purpose: Displays the amount of fuel needed to completely fill your tank on the ODB / Virtual Cockpit.
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select”, then click on“17 – Instruments“.
4 – Click on“Coding – 07“, then on“Long Coding Helper“.
5 – Select byte “10“
. Then check bit “4“: “Volume to Be Replenished”
If it’s a hidden bit, you need to replace the 0 with a 1 in “Binary.”
