Purpose: Allowsthe use of fog lights for the “Coming Home” and “Leaving Home” functions. (after 2010)
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Coding 07”.
5 – Select the “0” module and click on “Long Coding Helper”:
Octet 17 :
Bit 3 : Cocher “Coming-Home (CH) via Fog-Light active”
This post is also available in:
Français (French)
