Purpose : to configure brake assist.
Procedure:
1 – With the engine off and the ignition off, connect your official VAG-COM VCDS cable to the computer, then connect the other end to your vehicle’s diagnostic port.
2 – Turn on the ignition, then launch the VCDS program.
Line 1:
3 – Click on“Select”, then click on“03 – ABS”.
4 – Click “Adaptation – 10.”
5 – Select Channel 09 (Brake Assist from the drop-down list)
Choose a value
0“medium”
1 “low” (with low assistance, the brake pedal will be harder and more pressure will be required to brake)
2 “high” (with high assistance, the brake pedal will be softer and less pressure will be required to brake)
This post is also available in:
Français (French)
