
Purpose: Allows fog lights to be used as daytime running lights.
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1 (AFTER late 2009) :
3 – Click “ Select,” then click “ 09 – Cent. Elect.”
4 – Click on “ Code 07.”
5 – Select module “0” and click “Long Coding Helper”:
6 – Byte 14:
Set Bit 1
Line 1 (BEFORE the end of 2009):
3 – Click “ Select,” then click “ 09 – Cent. Elect.”
4 – Click on “ Code 07.”
5 – Select module “0” and click “Long Coding Helper”:
6 – Byte 0:
Bit 4: Check “Daytime Running Lights (North America)”
Bit 3: Uncheck

7 – Byte 17:
Bit 4: Check “Daytime Running Light with dimmed Low Beam” (or “Daytime Running Light via Fog Lights,” depending on your version of VCDS)


8- Adjusting the fog light intensity (from 1% to 99%)
Byte 20:
Change the value in the Dec box (the yellow box)

This post is also available in: