Polo 6 (AW1) – Fully opening sunroof with the remote control

VAG Coding VCDS ODBeleven VW Polo 6 AW1

Purpose: Allows the sunroof to open fully when opening with the remote control.


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Access control 2-SAD Richtung Komfortoeffnen“.

7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“Open” and confirm.


Line 2:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click “Security Access – 16,” then enter the code “31347”

5 – Click on“Adaptation – 10”.

6 – At the very top of this page, there is a drop-down menu.
From this drop-down menu, select “Zugangskontrolle 2-SAD Komfort schliessen.”

7 – On this same page, there is a second drop-down menu toward the bottom
.
From this menu, select “Active” and then confirm.

Line 3:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click “Security Access – 16,” then enter the code “31347”

5 – Click on“Adaptation – 10”.

6 – At the very top of this page, there is a drop-down menu.
From this drop-down menu, select “Zugangskontrolle 2-SAD Komfort oeffnen.”

7 – On this same page, there is a second drop-down menu toward the bottom
.
From this menu, select “Active” and then confirm.

Line 4 (Optional, to open the sunroof completely):

3 – Click “Select,” then click “CA – Sunroof.”

4 – Click on“Security Access – 16” then enter the code“20103”.

5 – Click on“Adaptation – 10”.

6 – At the very top of this page, there is a drop-down menu.
From this drop-down menu, select “Target position for comfort opening” / “Komfortfunktionen-Ziellage bei Komfortöffnen

7 – On this same page, there is a second drop-down menu, but further down
.
From this menu, select “Sliding position ” then click Submit.

error: Content is protected !!
Enable Notifications OK No thanks