Purpose: Automatically unlocks all doors when the DSG automatic transmission is shifted to the “P” position.
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
3 – Click on “Select”, then click on “09 – Cent. Elect.”.
4 – Click “Security Access – 16,” then enter the code “31347”
5 – Click on “Adaptation – 10”.
6 – At the very top of this page, there is a drop-down menu.
From this drop-down menu, select “Access control – Autounlock NAR”
7 – On this same page, there is a second drop-down menu toward the bottom
.
From this menu, select “active, “ then confirm.
This post is also available in:
Français (French)
