Purpose: Allows the sunroof to open fully when using the “Comfort Open” function with the remote control.
Proceed :
1 – With the engine off and the ignition off, connect your official VAG-COM VCDS cable to the computer and then connect the other end to the diagnostic port of your vehicle.
2 – Turn on the ignition and then launch the VCDS program.
Line 1 (Optional to activate window opening/closing and sunroof with the key; if already activated or for models without the comfort module, see line 2 directly):
3 – Click on “ Select ” then click on “ 46 – Comfort Module ”.
4 – Click “Encoding 07,”then click “Long Coding Helper.”
5 – Select Byte 8:
Bit 2: Check “Comfort Opening Sunroof via Remote Control active”
Bit 6: Uncheck “Comfort Opening Type for Sunroof (0 = open/ 1 = lift)”
OR
Byte 6
Set bit 6
Line 2:
3 – Click on ” Select”, then click on “Select”.4F – Power Plant II ” .
4 – Click “Encoding 07,”then click “Long Coding Helper.”
5 – Select Byte 1:
Bit 0: Uncheck “Comfort function Sliding Roof: Tilted”
This post is also available in:
Français (French)
