Purpose: to unlock the limitations of Android Auto, allowing access to all functions without the restrictions imposed by default on the multimedia system.
SFD: yes
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostic socket or OBDeleven box.
2 – Switch on the ignition and run the VCDS program or the OBDeleven application.
Line 1:
3 – Click “Select,” then click “5F – Electrical Information“.
4 – Unlock SFD protection
5 – Click on“Adaptation – 10”.
6 – At the very top of this page, there is a drop-down menu.
In this drop-down menu, select “nhtsa_properties – nhtsa_limitation_switches_for_androidauto_limit_displayed_message_length”
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“not_activated” and confirm.
Line 2:
3 – Click “Select,” then click “5F – Electrical Information“.
4 – Unlock SFD protection
5 – Click on“Adaptation – 10”.
6 – At the very top of this page, there is a drop-down menu.
From this drop-down menu, select “nhtsa_properties – nhtsa_limitation_switches_for_androidauto_no_text_input”
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“not_activated” and confirm.
Line 3:
3 – Click “Select,” then click “5F – Electrical Information“.
4 – Unlock SFD protection
5 – Click on“Adaptation – 10”.
6 – At the very top of this page, there is a drop-down menu.
In this drop-down menu, select “nhtsa_properties – nhtsa_limitation_switches_for_androidauto_no_video_playback”
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“not_activated” and confirm.
Line 4:
3 – Click “Select,” then click “5F – Electrical Information“.
4 – Unlock SFD protection
5 – Click on“Adaptation – 10”.
6 – At the very top of this page, there is a drop-down menu.
From this drop-down menu, select “nhtsa_properties – nhtsa_limitation_switches_for_androidauto_no_setup_configuration”
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“not_activated” and confirm.
