
Purpose: Allows the daytime running lights (DRL) to be replaced by the fog lights during the daytime running light phase.
Warning! There are 6 lines of coding to do here.
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – At the very top of this page, there is a drop-down menu.
From this drop-down menu, select “Leuchte4TFL LB4-Lichtfunktion A 4“
7 – On this same page, there is a second drop-down menu located toward the bottom
of the page.
From this menu, select “not active” and then confirm.
Line 2:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – At the very top of this page, there is a drop-down menu.
From this drop-down menu, select “Leuchte5TFL RB32-Lichtfunktion A 5“
7 – On this same page, there is a second drop-down menu located toward the bottom
of the page.
From this menu, select “not active” and then confirm.
Line 3:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – At the very top of this page, there is a drop-down menu.
From this drop-down menu, select “Leuchte12NL LB45-Lichtfunktion C 12“
7 – On this same page, there is a second drop-down menu located toward the bottom
of the page.
From this menu, select “Daytime running lights” and then confirm.
Line 4:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click “Coding – 07.”
6 – At the very top of this page, there is a drop-down menu.
From this drop-down menu, select “Leuchte13NL RB5-Lichtfunktion C 13“
7 – On this same page, there is a second drop-down menu toward the bottom
.
From this menu, select “Daytime running lights” and then confirm.
Line 5:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – At the very top of this page, there is a drop-down menu.
From this drop-down menu, select “Leuchte12NL LB45-Dimmwert C 12″“
7 – On this same page, there is a second drop-down menu located toward the bottom
of the page.
From this menu, select either “0” or “100,” then confirm.
Line 6:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – At the very top of this page, there is a drop-down menu.
From this drop-down menu, select “Leuchte13NL RB5-Dimmwert C 13“
7 – On this same page, there is a second drop-down menu located toward the bottom
of the page.
From this menu, choose between “0” and “100,” then confirm.
This post is also available in: