Purpose: to set automatic door unlocking when the key is removed.
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click “Adaptation 10.”
5 – Channel 05 (drop-down list (Auto-Unlock)) Set value to 1
Line 2 If the adaptation channel is not enabled.
3 – Click “Select,” then click “09 – Power Plant.“
4 – Click “Encoding – 07,” then “Long Coding Helper”
Byte 0 :
Bit 1: Check “Auto-Unlock active”.
This post is also available in:
Français (French)
