Purpose: Enables the rear lights to turn on when the daytime running lights (Scandinavian DRL) are activated.
Warning!! There is either one or two lines of code to write here.
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Méthode 1 pour tous type de feux arrière :
This method turns on the dashboard lights, but it’s much simpler!!!
Line 1:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on “Adaptation – 10”.
6 – At the very top of this page, there is a drop-down menu.
In this drop-down menu, select “Daytime running lights—Tagfahrlicht—Dauerfahrlicht activated in addition to parking lights.”
7 – On this same page, there is a second drop-down menu near the bottom of the page.
From this menu, select “active” and then confirm.
Method 2 for LED taillights:
Line 1:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – Sur cette page, tout en haut, il y a un menu déroulant.
Dans ce menu déroulant, choisir « Leuchte23SL HLC10-Lichfunktion D 23 »
7 – On this same page, there is a second drop-down menu toward the bottom of the page.
From this menu, select “Daytime running lights” and then confirm.
Line 2:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – At the very top of this page, there is a drop-down menu.
From this drop-down menu, select “Leuchte24SL HRA65-Lichfunktion D 24.”
7 – On this same page, there is a second drop-down menu toward the bottom of the page.
From this menu, select “Daytime running lights” and then confirm.
This post is also available in:
Français (French)
