Function: Disables the beeps when opening or closing the power trunk or tailgate. (Octavia 3 Kombi)
Procedure:
1 – With the engine off and the ignition switched off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostic port.
2 – Turn on the ignition, then launch the VCDS program.
Line 1:
3 – Click “ Select,” then click “ 6D – Trunk Electronics.”
4 – Click on “Security Access – 16,” then enter the code “12345“
5 – Click on “Adaptation – 10.”
6 – At the very top of this page, there is a drop-down menu.
From this drop-down menu, select “ENG131232-MAS01911 – Ausstattungen aktivieren-Tongeber” / “Activate Equipment Sound Generator“
7 – On this same page there is a second drop-down menu, but towards the bottom
of the page.
On the latter, select ” not active ” and then confirm.
This post is also available in:
Français (French)
