Purpose: Allows you to configure the Coming-Home behavior.
Procedure :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1 :
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Coding 07”.
5 – Select the “0” module and click on “Long Coding Helper”:
The Coming-Home timer starts when the door is opened
Octet 12 :
Bit 0 : Check “Coming-Home Timer (0 = Start with Term.15 OFF / 1 = Start with Door Opening)”
The Coming-Home timer starts when the ignition is turned off
Octet 12 :
Bit 0 : Uncheck “Coming-Home Timer (0 = Start with Term.15 OFF / 1 = Start with Door Opening)”
The Coming-Home feature is activated manually by flashing the headlights
Byte 12:
Bit 2: Uncheck “Coming-Home Mode (0 = automatic / 1 = manual)”
Coming-Home is activated automatically
Byte 12:
Bit 2: Check “Coming-Home Mode (0 = automatic / 1 = manual)”
This post is also available in:
Français (French)
