Purpose: Allows you to customize the brightness of the climate control indicator lights.
Warning!! There are 3 coding lines to enter here.
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click “Select,” then click “08 – Auto HVAC.”
4 – Click “Adaptation – 10“
5 – At the very top of this page, there is a drop-down menu.
From this drop-down menu, select “Dimming_characteristic_2-Y4“
6 – On this same page, there is a second drop-down menu located toward the bottom
.
From this menu, select a value expressed as a “%“
This value determines the brightness of all LED indicators (Default value: “21%“)
Line 2:
3 – Click “Select,” then click “08 – Auto HVAC.”
4 – Click on“Adaptation – 10”.
5 – At the very top of this page, there is a drop-down menu.
From this drop-down menu, select “Dimming_characteristic_3-Y4“
6 – On this same page, there is a second drop-down menu located toward the bottom
.
From this menu, select a value expressed as a “%“
This value determines the brightness of all LED indicators (Default value: “12%“)
Line 3:
3 – Click “Select,” then click “08 – Auto HVAC.”
4 – Click on “Adaptation – 10“
5 – At the very top of this page, there is a drop-down menu.
From this drop-down menu, select “Dimming_characteristic_5-Y4“
6 – On this same page, there is a second drop-down menu, but further down
the page.
From this menu, select a value expressed as a “%“
This is the brightness of all the LED indicators (Default value: “10%“)
This post is also available in:
Français (French)
