
Purpose: Displays the fan speed when automatic climate control mode is activated. (Climatronic fan speed display, Auto mode)
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click “Select” then click “08 – Climatronic” (or “08 – Auto HVAC,” depending on your VCDS version)
4 – Click on “Coding – 07,” then click on “Long Coding Helper“
5 – Select byte “08“
Then check bit “0“: “Blower Display in Auto Operation active“


This post is also available in: