
Purpose: Enables the USB port for iPhone CarPlay accounting (after Full Link activation and USB and/or USB cable change) for MIB2 (Retrofit).
For firmware references:
MST2_EU_SE_ZR_P02XXT (before 2016)
Modify the MIB2 coding to recognize the new USB port (USB connector part no. 5Q0 035 726 E) for CarPlay and USB media playback. You’ll need to modify a key on the green USB connector so that it fits into the purple connector on the cable. After programming, restart the MIB2 (press and hold the Power button until it restarts) and use a USB data transfer cable.
–> Full Link CarPlay and Android Auto Activation
–> VW Golf 7 USB/AUX Port for CarPlay Media MIB2 5Q0 035 726 E on VAG Custom
–> Adding CarPlay / Android Auto after activating Full Link MIB2 2xxT
–> Disable MirrorLink
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select” then click on“5F – Electr. information”.
4 – Click on“Codage- 07” then click on“Assistant Codage Long”.
5 – Select byte19“
Then check the “6-7” bit (C0 USB Configuration: USB and iPhone Functionality)
Line 2 (optional) :
3 – Click “Select,” then click “5F – Electrical Information.“
4 – Click “Security Access – 16,” then enter the code “20103“
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Interface for external media activation – connection 1“
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, choose the value “activated“
This post is also available in: