
Purpose: Allows you to turn on the cornering lights along with the fog lights.
Procedure:
1 – With the engine off and the ignition switched off, connect your official VAG-COM VCDS cable to the computer, then connect the other end to your vehicle’s diagnostic port.
2 – Switch on the ignition and run the VCDS program.
Line 1:
This modification is only available for vehicles equipped with a 30-byte power unit.
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Coding 07”.
5 – Select the “0” module and click on “Long Coding Helper”:
Byte 23:
Bit 2: Check “Internal Turn Light Control Algorithm active”
Bits 3–4: Select “08 Turn Lights via fog lights” from the drop-down list
This post is also available in: