But : Permet d’activer les veilleuses US avec les clignotants.
Warning!! There are 10 (headlights) or 8 (taillights) coding lines to set here. (Leon Phase 1 only)
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Turn signal US headlights :
Line 1:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – At the very top of this page, there is a drop-down menu.
From this drop-down menu, select “Leuchte 0 BLK VL B36-Lichtfunktion C 0.”
7 – On this same page, there is a second drop-down menu further down
.
From this menu, select “Standlicht allgemein (Schlusslicht; Positionslicht; Begrenzungslicht)” and then confirm. (Default: inactive or Blinken links Dunkelphase)
Line 2:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – At the very top of this page, there is a drop-down menu.
From this drop-down menu, select “Leuchte1BLK VRB20-Lichtfunktion C 1“
7 – On this same page there is a second drop-down menu, but towards the bottom
of the page.
On the latter, choose “ Standlicht allgemein (Schlusslicht; Positionslicht; Begrenzungslicht) ” then validate. (Origin: inactive or Blinken rechts Dunkelphase )
Line 3: (Option: US pilot lights on position 0)
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – At the very top of this page, there is a drop-down menu.
From this drop-down menu, select “Leuchte 0 BLK VL B36-Lichtfunktion D 0“
7 – On this same page, there is a second drop-down menu located toward the bottom
of the page.
From this menu, select “Daytime running lights” and then confirm. (Default: off)
Line 4: (Option: US pilot lights on position 0)
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – At the very top of this page, there is a drop-down menu.
From this drop-down menu, select “Leuchte1BLK VRB20-Lichtfunktion D 1“
7 – On this same page, there is a second drop-down menu located toward the bottom
of the page.
From this menu, select “Daytime running lights” and then confirm. (Default: off)
Line 5:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – At the very top of this page, there is a drop-down menu.
From this drop-down menu, select “Leuchte 0 BLK VL B36-Dimmwert CD 0“
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, choose between“0” and“100” and confirm. (Light illumination between 0 and 100%, example: 30) (Origin : 0)
Line 6:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – At the very top of this page, there is a drop-down menu.
From this drop-down menu, select “Leuchte1BLK VRB20-Dimmwert CD 1“
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, choose between“0” and“100” and confirm. (Light illumination between 0 and 100%, example: 30) (Origin : 0)
Line 7:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – At the very top of this page, there is a drop-down menu.
From this drop-down menu, select “Leuchte 0 BLK VL B36-Lichtfunktion E 0“
7 – On this same page, there is a second drop-down menu located toward the bottom
of the page.
From this menu, select “Blinken links Dunkelphase” and then confirm. (Source: inactive)
Line 8:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – At the very top of this page, there is a drop-down menu.
From this drop-down menu, select “Leuchte1BLK VRB20-Lichtfunktion E 1“
7 – On this same page, there is a second drop-down menu further down
.
From this menu, select “Blinken rechts Dunkelphase” and then confirm. (Source: inactive)
Line 9:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – At the very top of this page, there is a drop-down menu.
From this drop-down menu, select “Leuchte 0 BLK VL B36-Dimming Direction EF 0“
7 – Sur cette même page se trouve un deuxième menu déroulant mais vers le bas
de la page.
Sur ce dernier, choisir “minimize” puis valider. (Origine : maximize)
Line 10:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – At the very top of this page, there is a drop-down menu.
From this drop-down menu, select “Leuchte1BLK VRB20-Dimming Direction EF 1“
7 – Sur cette même page se trouve un deuxième menu déroulant mais vers le bas
de la page.
Sur ce dernier, choisir “minimize” puis valider. (Origine : maximize)
U.S.-style taillight flasher:
Line 1 (Option: US pilot lights on position 0):
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte 18 BLK – Lichtfunktion D 0”.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, choose “Daytime running lights”.Daytime running lights“then confirm. (Origin: inactive)
Line 2 (Option: US pilot lights on position 0):
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte 19 BLK – Lichtfunktion D 1”.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select “Daytime running lights”.Daytime running lights“then confirm. (Origin: inactive)
Line 3:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte 18 BLK – Dimmwert CD 0”.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, choose between“0” and“100” and confirm. (Light illumination between 0 and 100%, example: 30) (Origin : 0)
Line 4:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte 19 BLK -Dimmwert CD 1”.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, choose between“0” and“100” and confirm. (Light illumination between 0 and 100%, example: 30) (Origin : 0)
Line 5:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte 18 BLK – Lichtfunktion E 0”.
7 – On this same page, there is a second drop-down menu located toward the bottom
of the page.
From this menu, select “Blinken links Dunkelphase” and then confirm. (Source: inactive)
Line 6:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte 19 BLK – Lichtfunktion E 1”.
7 – On this same page, there is a second drop-down menu further down
.
From this menu, select “Blinken rechts Dunkelphase” and then confirm. (Source: inactive)
Line 7:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte 18 BLK – Dimming Direction EF 0”.
7 – Sur cette même page se trouve un deuxième menu déroulant mais vers le bas
de la page.
Sur ce dernier, choisir “minimize” puis valider. (Origine : maximize)
Line 8:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte 19 BLK – Dimming Direction EF 1”.
7 – Sur cette même page se trouve un deuxième menu déroulant mais vers le bas
de la page.
Sur ce dernier, choisir “minimize” puis valider. (Origine : maximize)
This post is also available in:
Français (French)
