Purpose: Turns on the rear turn signals when the trunk or tailgate is open.
Watch out! There are 4 lines of coding to do here.
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click “Adaptation – 10.”
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte19BLK HRC31 – Lichtfunktion C 19”.
7 – On this same page, there is a second drop-down menu, but it’s further down
on the page.
In the latter, select the value “Heckdeckel Offen” / “Rear Lid Open” and then confirm. (default: not active)
Line 2:
3 – Click “Select,” then click “09 – Cent. Elect.“
4 – Click “Security Access – 16” then enter the code “31347“
5 – Click “Adaptation – 10.”
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte19BLK HRC31 – Dimmwert CD 19”.
7 – On this same page, there is a second drop-down menu toward the bottom
.
From this menu, select “100” and then confirm. (lighting percentage / source: 0)
Line 3:
3 – Click “Select,” then click “09 – Cent. Elect.”
4 – Click “Security Access – 16,” then enter the code “31347“
5 – Click “Adaptation – 10.”
6 – At the very top of this page, there is a drop-down menu.
In this drop-down menu, select “Leuchte18BLK HLA60 – Lichtfunktion C 18“
7 – On this same page, there is a second drop-down menu further down
the page.
From this menu, select “Heckdeckel Offen” / “Rear Lid Open” and then confirm. (source: not active)
Line 4:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click “Adaptation – 10.”
6 – At the very top of this page, there is a drop-down menu.
In this drop-down menu, select “Leuchte18BLK HLA60 – Dimmwert CD 18“
7 – On this same page, there is a second drop-down menu further down
the page.
In this second drop-down menu, select“100” and then confirm. (lighting percentage / default: 0)
This post is also available in:
Français (French)
