Purpose: Allows the sunroof to open fully when opening with the remote control.
SFD: no
Procedure:
1 – With the engine off and the ignition off, connect your official VAG-COM VCDS cable to the computer, then connect the other end to your vehicle’s diagnostic port or your OBDeleven unit.
2 – Turn on the ignition, then launch the VCDS program or the OBDeleven app.
Line 1
3 – Click “Select,” then click “CA – Sunroof.”
4 – Click on“Security Access – 16” then enter the code“20103”.
5 – Click on“Adaptation – 10”.
6 – At the very top of this page, there is a drop-down menu.
In this drop-down menu, select “Target Position for Convenience Opening” / “Control_unit_for_sun_roof_convenience_functions – Convenience_opening_target_attitude“
7 – On this same page, there is a second drop-down menu, but further down
.
From this menu, select “Sliding position ” / “sliding_position,” then click Submit.
This post is also available in:
Français (French)
