Purpose: Allows you to turn on the rear turn signals and the LED rear fog lights together (turn them on at the same time).
Warning! There are 2 lines of coding to do here.
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to
the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – At the very top of this page, there is a drop-down menu.
From this drop-down menu, select “Leuchte26NSL LA72-Lichtfunktion C 26.”
7 – On this same page, there is a second drop-down menu located toward the bottom
.
From this menu, select “Blinken links Hellphase” and then confirm.
Line 2:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on “Adaptation – 10”.
6 – At the very top of this page, there is a drop-down menu.
From this drop-down menu, select “Leuchte27NSL RC6-Lichtfunktion C 27”
7 – On this same page, there is a second drop-down menu located toward the bottom
.
From this menu, select “Blinken rechts Hellphase” and then confirm.
This post is also available in:
Français (French)
