Purpose: Allows you to unlock certain multimedia system menus while driving, and to enable text entry for CarPlay and Android Auto, which are normally disabled when the vehicle is in motion.
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition, then run the VCDS program.
Line 1:
3 – Click on ” Select”, then click on ” Select “, then click on ” Select “. Procedure: 1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.5F – Information Electr.” .
4 – Click “Adaptation – 10.”
Line 1 (Menu)
5 – At the very top of this page, there is a drop-down menu.
From this drop-down menu, select “Locked menu contents” (FB CAR, media , and nav)
6 – On this same page, there is a second drop-down menu located toward the bottom
of the page.
From this menu, select “non_blocked” and then confirm.
Line 2
5 – At the very top of this page, there is a drop-down menu.
From this drop-down menu, select “NHSTA Properties“
6 – On this same page, there is a second drop-down menu located toward the bottom
of the page.
From this menu, select “not_activated” and then confirm.
Line 3 (CarPlay)
5 – At the very top of this page, there is a drop-down menu.
In this drop-down menu, select “nhtsa_limitation_switches_for_carplay_no_softKeyboard“
6 – On this same page, there is a second drop-down menu located toward the bottom
of the page.
From this menu, select “not_activated” and confirm.
Line 4 (Android Auto)
5 – At the very top of this page, there is a drop-down menu.
In this drop-down menu, select “nhtsa_limitation_switches_for_androidauto_no_text_input“
6 – On this same page, there is a second drop-down menu located toward the bottom
of the page.
From this menu, select “not_activated” and confirm.
