Purpose: to set Hill Start Assist operation. (hill-start assist)
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select”, then click on“03 – ABSBrakes ”.
4 – Click “Adaptation – 10.”
5 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Hill Start assistant” / “Assistant démarrage en côte”.
6 – On this same page, there is a second drop-down menu located toward the bottom
.
From this menu, select the value based on your preference:
- “normal” (default value)
- “Early” (faster triggering)
- “Late” triggering
then click “Submit.”
This post is also available in:
Français (French)
