Purpose: to activate the automatic parking brake function. When the vehicle is parked, the parking brake is automatically applied, so you no longer need to operate it manually.
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click “Select,” then click “03 – Brake.”
4 – Click “Security Access – 16,” then enter the code “ 40168“
5 – Click on“Adaptation – 10”
6 – Select Channel :“Automatic parking brake ” or“Automatische Parkbremse” or“Frein de stationnementautomatique”
Set value to“Active
This post is also available in:
Français (French)
