Purpose: Disables the warning message or dialog prompting the driver to turn on the low beams when the headlight switch is in position 0.
Procedure:
1 – With the engine off and the ignition switched off, connect your official VAG-COM VCDS cable to the computer, then connect the other end to your vehicle’s diagnostic port or your OBDeleven unit.
2 – Turn on the ignition, then launch the VCDS program or the OBDeleven app.
Line 1:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Unlock SFD protection.
5 – Click on“Adaptation – 10”.
6 – At the very top of this page, there is a drop-down menu.
In this drop-down menu, select “Fahrlichthinweis – Fahrlicht_Hinweis_mehrfach ”
7 – On this same page, there is a second drop-down menu toward the bottom of the page.
From this menu, select “no active ” and then confirm.
Line 2:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Unlock SFD protection.
5 – Click on“Adaptation – 10”.
6 – At the very top of this page, there is a drop-down menu.
From this drop-down menu, select “Fahrlichthinweis – Fahrlichtwarnung_Hinweis_Konfig“
7 – On this same page, there is a second drop-down menu toward the bottom of the page.
From this menu, select “kein_Hinweis” and then confirm.
This post is also available in:
Français (French)
