Purpose: Enables the rear lights to turn on when the daytime running lights (Scandinavian DRL) are activated. (Starting in 2010)
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on “Coding – 07“.
5 – Byte 18, Disable bit 0, bit 1 and Enable bit 2
This post is also available in:
Français (French)
