But : Permet d’utiliser les feux antibrouillard arrière comme feux de position et feux stop.
This modification is only possible for vehicles with a 30-byte module.
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1 (fog lights/brake lights):
3 – Click “ Select,” then click “ 09 – Cent. Elect.”
4 – Click on “ Code 07.”
5 – Select module “0” and click “Long Coding Helper”:
6 – Byte 21:
Bit 4: Check “Rear Fog Light as Brake Light ”
Line 2 (fog lights/parking lights):
3 – Click “ Select,” then click “ 09 – Cent. Elect.”
4 – Click on “ Code 07.”
5 – Select module “0” and click “Long Coding Helper”:
Byte 10: Enter the value 22 in the ” Dec” field
This post is also available in:
Français (French)
