Purpose : Enables automatic door locking at speeds over 15km/h to be set.
Information: If auto-lock doesn’t work, deactivate and reactivate coding with hood open.
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click “Select,” then click “09 – Cent. Elect.”
4 – Click “Adaptation 10.”
5 – Channel 03 (Auto-Lock drop-down list) Set value to 1
Line 2 If the adaptation channel is not enabled.
3 – Click “Select,” then click ““09 – Cent. Elect.”“.
4 – Click “Encoding – 07,” then “Long Coding Helper”
Byte 0:
Bit 4 : Check “Auto-Lock active”.
This post is also available in:
Français (French)
