Purpose: Turns off the audible alarm and the indicator light on the dashboard when driving without a seatbelt.
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select”, then click on“17 – Instruments“.
4 – Click on“Coding – 07” then“Long Coding Helper“.
5 – Select byte 0:
Bits 2–4: Select “Seat Belt Warning inactive” from the drop-down list.
OR
4 – Click “Adaptation – 10.”
5 – Click “Security Access – 16,” then enter the code “20103“
6 – At the very top of this page, there is a drop-down menu.
In this drop-down menu, select “ Deactivate Seat Belt Warning.”
7 – On this same page, there is a second drop-down menu toward the bottom
.
From this menu, select “Oui” / “Yes” and then confirm.
This post is also available in:
Français (French)
