Purpose: to activate the comfort indicators.
(By default, the number of flashes is 3. This value can be changed between 1 and 5. )
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click “ Select,” then click “ 09 – Cent. Elect.”
4 – Click on “Coding – 07”
5 – Select module “0” and click “Long Coding Helper”:
Byte 12 :
Bit 5: “Comfort Turn Signals active” checkbox
This post is also available in:
Français (French)
