Purpose : To select the type of door opening after pressing the remote control.
Selective: one press unlocks only the driver’s door, two presses unlocks all doors.
All doors: one press unlocks all doors.
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on ” Select”, then click on ” 46 – Comfort Module“.
4 – Click on ” Coding- 07“.
Add +00001 to the existing coding for all doors if you are in selective mode.
