Purpose: Allows you to display the rear windshield wiper’s “Comfort” mode in the CAR menu. This means you can manually disable the automatic wiping function when you turn on the rear window wiper (with intermittent or continuous wiping enabled).
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – At the very top of this page, there is a drop-down menu.
From this drop-down menu, select “Rear Window Wiper Menu Control Comfort Wipe HW” / “Heckscheibenwischer-Menusteuerung Komfortwischen HW” / “Rear Window Wiper Menu Control Comfort Wipe HW”
7 – On this same page, there is a second drop-down menu toward the bottom of the page.
From this menu, select “active,” then confirm.
This post is also available in:
Français (French)
