Purpose: Enables the LED taillights to be activated along with the daytime running lights (DRL) while maintaining the taillights’ aggressive styling. The taillights thus remain on when the daytime running lights are activated. (Scandinavian DRL)
Warning! There are 2 lines of coding to do here.
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to
the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – At the very top of this page, there is a drop-down menu.
From this drop-down menu, select “Leuchte16BLK SLB35BLK SL KC9 – Lichtfunktion D16“
7 – On this same page, there is a second drop-down menu further down
.
From this menu, select “Daytime Running Lights” and confirm. (default: Not active)
Line 2:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on “Adaptation – 10”.
6 – At the very top of this page, there is a drop-down menu.
From this drop-down menu, select “Leuchte17TFL R BLK SRB3TFL R BLK SR KC3 – Lichtfunktion D17 “
7 – On this same page, there is a second drop-down menu located toward the bottom
of the page.
From this menu, select “Tagfahrlicht” and then confirm. (Default: Not active)
This post is also available in:
Français (French)
