Purpose: Allows you to modify and customize the Active Info Display / Virtual Cockpit (AID) in order to modify the speedo and Vmax.
SFD: yes
Procedure:
1 – With the engine off and the ignition switched off, connect your official VAG-COM VCDS cable to the computer, then connect the other end to your vehicle’s diagnostic port or your OBDeleven unit.
2 – Turn on the ignition, then launch the VCDS program or the OBDeleven app.
Line 1:
3 – Click on ” Select”, then click on ” 17- Instruments “.
4 – Click on “Adaptation – 10”.
5 – At the very top of this page, there is a drop-down menu. From this drop-down menu, select the ” Tachometer ” / “Tachometer end value” / “Speedometer_final_value” channel
6 – Under the ” Value: ” option, select one of the 6 options
Variant 0 = 260 km/h (standard)
Variant 1 = 280 km/h
Variant 2 = 240 km/h
Variant 3 = 300 km/h
Variant 4 = 320 km/h
Variant 5 = 260 km/h with intermediate values
Variant 6 = 280 km/h with intermediate values
