Purpose: Enables the xenon headlight animation when the vehicle starts. (DLA Overview)
Procedure:
1 – With the engine off and the ignition switched off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostic port.
2 – Turn on the ignition, then launch the VCDS program.
Line 1:
3 – Click “Select,” then click “55 – Headlight Range”
4 – Click on “Security Access – 16,” then enter the code “20103“
5 – Click on ” Adaptation – 10″
6 – Select the “Presentation mode” from the drop-down list
7 – Select “active” from the second list
This post is also available in:
Français (French)
