Purpose: Allows you to set the distance between the curb and the car during Park Assist.
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select” then click on“10 – Park/Steer Assist” / “10 – Assistance stationnt”.
4 – Click “Security Access – 16,” then enter the code “71679“
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Abstand zum Bordstein” / “Distance to curb” / “Ecart avec la bordure”.
7 – On this same page, there is a second drop-down menu toward the bottom
of the page.
From this menu, select the distance of your choice (in cm). The default value is “15 cm“; then click “Confirm.”
This post is also available in:
Français (French)
