Purpose: to activate driver profiles on the ODB and MIB screens, to be selected according to the driver. The profile stores the driver’s settings (radio, ventilation, etc.).
Watch out! There are 10 lines of coding to be done here, see 11 (for Golf 7 phase 1).
This option can only be enabled with a VCDS that includes the experimental codes for the lo coding wizardng! (MIB2-compatible)
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Coding 07”.
5 – Select the “0” module from the drop-down list and click on “Long Coding Helper”:
Byte 8, Bit 2: Check “Custom profile”.
Then Byte 11 Bit 4-6: Select“10 Profil_Variante, Konto (v.1.x)”.
Line 2:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – At the very top of this page, there is a drop-down menu.
In this drop-down menu, select “Personalization-Aktivierungsoption_im_HMI-Menue_sichtbar“
7 – On this same page, there is a second drop-down menu toward the bottom
.
From this menu, select “Active” and then confirm.
Line 3:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – At the very top of this page, there is a drop-down menu.
From this drop-down menu, select “Personalization-Anzahl_Benutzerkonten“
7 – On this same page, there is a second drop-down menu, but further down
.
From this menu, select “4” and then confirm.
Line 4:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Personalization-Automatische_Schluesselzuordnung”.Personalization-Automatische_Schluesselzuordnung“
7 – On this same page, there is a second drop-down menu toward the bottom
.
From this menu, select “Active” and then confirm.
Line 5:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – Sur cette page, tout en haut, il y a un menu déroulant.
Dans ce menu déroulant, choisir “Personalization-Benutzerkontenverwaltung_in_HMI-Menue_sichtbar“
7 – On this same page, there is a second drop-down menu toward the bottom
.
From this menu, select “Active” and then confirm.
Line 6:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – At the very top of this page, there is a drop-down menu.
In this drop-down menu, select “Personalization-Personalisierung_aktiv“
7 – On this same page, there is a second drop-down menu toward the bottom
.
From this menu, select “Active” and then confirm.
Line 7:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – At the very top of this page, there is a drop-down menu.
In this drop-down menu, select “Personalization-Personalisierungsfunktionen_in_HMI-Menue_sichtbar“
7 – On this same page, there is a second drop-down menu toward the bottom
.
From this menu, select “Active” and then confirm.
Line 8:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Personalization-PSO_FSG_Setup2_Bit_0”.
7 – On this same page, there is a second drop-down menu, but it’s toward the bottom of the page.
For the latter, select “Active” and then confirm.
8 – Repeat this action for PSO_FSG_Setup2_Bit 1 / 2 / 3 / 4 / 5 / 6 / 7
Line 9:
3 – Click “Select,” then click “17 – Instruments.”
4 – Click on“Coding – 07” then on“Long Coding Helper” .
5 – Select Byte 10,
Then check Bit 0: “Customization”
Line 10:
3 – Click “Select,” then click “08- Auto HVAC.”
4 – Click on“Coding – 07” then on“Long Coding Helper” .
5 – Select Byte 15, Bits 3-4: Select “08 – Customization En abled ”
Line 11 (if you have the driver’s seat memory option):
3 – Click “Select,” then click “36- Seat mem driver.”
4 – Click on“Coding – 07” then on“Long Coding Helper” .
5 – Select Byte 09, Bits 1-2: Select “02 – Func_key_memory_personalization, personalization active ”
